To fit the Dare To Be Different 140S, 140L and 180L only.

The sliding wall is a trapezoidal-shaped wall on the upper side provided with a tendon, and at the bottom provided with five loops for ground pegs. With the tendon, the sliding wall can be very simple in the bottom plate of the rooftent be pushed in the profile. It can be used on both sides of the rooftent. The sliding wall gives you the opportunity to block wind, rain or sun and create so a special place

The sliding wall is usable on all soft shell roof tents, but also on other brands rooftents this sliding wall is usable, the bottom plate has to be provided with a tendon profile. The sliding wall has a height of 2.3m so that the height of the car where the rooftent on state is not a problem for the use of the sliding wall.

It is also possible to use the sliding wall as a small awning. This awning can be made if you use tent poles, which you gan put between the loops.